Yardco HomeAbout YardcoFrequently Asked QuestionsContact Yardco
 
Imported Beach Pebbles & River Rock
Flagstone, Fieldstone & Slate
Boulders (Domestic & Imported)
River Flats & River Rounds
Crushed & Natural Shell

Our unmatched selection includes distinctive products that are not available from any other source

Tap into our expertise in getting jobs done and our exensive network of qualified contractors

Yardco's great selection and volume makes us a favorite with contractors and landscapers

Rock & Stone Conversion

Q:  How much Flagstone would I need to cover a 2,400 square foot Patio or Driveway?
A: 

Average: 1 ton covers approximately 100 s.f. @ ¾” to 1 ½” thick.

  1. 16 pallets @ 1.5 tons/3,000 lbs ea Exp: 16 x 1.5 x 100 = 2,400 s.f.
  2. 24 pallets @ 1.0 tons/2,000 lbs ea

Average: 1 ton covers approximately 90 s.f. @ 1 ½” to 2” thick.

  1. 13 pallets @ 2.0 tons/4,000 lbs ea
    Exp: 13 x 2.0 x 90 = 2,430 s.f.
  2. 18 pallets @ 1.5 tons/3,000 lbs ea
  3. 27 pallets @ 1.0 tons/2,000 lbs ea
   
Q:  How much Thin Veneer would I need to cover a 2,400 square foot Patio or Driveway?
A: 

Average: 1 ton covers approximately 180 s.f. @ ½” to1” thick.

  1. 9 pallets @ 1.5 tons/3,000 lbs ea Exp: 9 x 1.5 x 180 = 2,430 s.f.
   
Q:  How are your Beach Pebbles, River Rock and River Flats distributed?
A:  These are all distributed in 40 lb. bags.
   
Q:  What area would 1 bag or Beach Pebbles, River Rock and River Flats cover?
A: 

Average: 1 bag covers approximately 3 s.f. @ 2 stones deep (1” to 1 ¼” deep).

The bigger to pebble/rock; the smaller the coverage and vice versa - the smaller the pebble/rock; the larger the coverage.

This applies to stone, 2” to 2 ½” in diameter, and applies to our beach pebbles & river rock & flats.

One 40 lb. bag of Beach Pebbles, 3 ¼”to 3 ¾”, yields 2 ½ s.f. @ 2 stones deep (2” deep)

One 40 lb. bag of Mini Confetti or Chattahoochee, 1/8” to ½”, yields 4 s.f. @ 1 ½” to 2” deep

   
Q:  Do you also sell domestic bagged rock?
A:  No. However, we sell domestic river rock and other crushed rock by the semi-load;
between 18 – 25 tons per load.
   
Q:  How much rock would I need to cover area of about 20 feet by 30 feet?
A: 

Average: 1 c.y. covers 100 s.f. @ 2” deep

Exp: Area = Length (20ft) x Width (30ft)
Area = 600 s.f. You will need: 600 ÷ 100 = 6 cu. yds.

   
   

Our selection, location, and inventory make us THE source for Contractors

We carry an unmatched selection of rocks and stone, including unique materials not available anywhere else.

Not sure where to start? Our knowledgeable staff will help you.

Plan your project right with our Rock and Stone Conversion Information.

Save time, save gas, save money. Our Boynton Beach location has everything you need!

Yardco is proud to be the exclusive regional dealer of Champlain Stone.